Compliance guide

Pool fence compliance in Victoria

Every pool and spa in Victoria needs a compliant barrier, registered with council and re-inspected every four years. Here is what inspectors check, and how we fix what fails.

Compliance comes firstBuilt around the applicable Victorian pool barrier requirements
More than just glassFrameless glass, semi-frameless, steel rod, batten and aluminium fencing
Experienced buildersConstruction-led installation with quality workmanship and attention to detail
Melbourne‑wide serviceServicing Melbourne and the Mornington Peninsula

The key rules at a glance

  • 1200 mmMinimum height of the barrier, measured from finished ground level outside the fence.
  • ≤ 100 mmMaximum gap between panels or bars, and under the bottom of the fence.
  • 900 mmNon-climbable zone on the outside. No pots, BBQs, garden beds or ledges a child could use to climb.
  • GatesSelf-closing and self-latching from any position, and opening away from the pool.
  • 4 yearsHow often the barrier must be re-inspected and a new certificate lodged with council.
1200min ≤100 gap 900 non-climbable zone OUTSIDE POOL
Simplified. The full rules are in AS 1926.1; the edition that applies depends on when the pool was built.

Registration and certificates

Victorian law requires pool and spa owners to register the pool with their local council and lodge a certificate of barrier compliance. A registered building surveyor or building inspector inspects the barrier and issues the certificate if it complies. The barrier must then be re-inspected, and a new certificate lodged, every four years.

When we build a new fence, we book the barrier inspection once installation is finished, so you have what you need to lodge with council.

Why pools fail inspection

These are the problems inspectors find most often, and all of them can be fixed:

  1. The gate doesn't self-close or self-latch from every open position. Hinges wear and lose tension over time.
  2. The gate opens towards the pool. Pool gates must swing away from the pool area.
  3. Climbable objects within 900 mm of the outside of the fence: pot plants, BBQs, chairs, garden edging, a tree branch or an air-conditioning unit.
  4. Gaps under the fence grown past 100 mm because soil has washed away or paving has moved.
  5. The fence is too low after new paving, decking or garden beds raised the ground outside it.
  6. Boundary fences and walls that form part of the barrier but have footholds or rails on the outside.
  7. Doors and windows that open directly into the pool area, which older pools often have.

How we fix it

Send us the inspector's report and a few photos. We quote the specific work needed, carry it out (often in one visit) and can arrange the re-inspection. If the old barrier isn't worth saving, we quote a new frameless glass, semi-frameless, steel rod, batten or aluminium fence alongside the repair, so you can compare.

This page is a plain-English summary, not legal advice. Your council and your inspector have the final say on what applies to your pool.

Questions

Common questions

Do I need to register my pool in Victoria?

Yes. Pools and spas that can hold more than 300 mm of water must be registered with your local council, and the owner must lodge a certificate of barrier compliance. Your council can tell you its registration process and fees.

How often does a pool fence need to be inspected?

Every four years. A registered building surveyor or building inspector checks the barrier and, if it complies, issues a certificate for you to lodge with council.

Which standard applies to my pool?

Barriers are generally assessed against the standard that applied when the pool was built. New pools are built to the current AS 1926.1. Your inspector will confirm which edition applies.

Can my boundary fence be part of the pool barrier?

Sometimes. A boundary fence can form part of the barrier if it meets the height and climbability rules on the pool side. It is one of the most common reasons for failed inspections, so we check it on every job.

Get a free quote

Answer six quick questions about your pool and tell us where to send the quote. It takes about a minute.

  • We reply within one business day
  • Free measure on site
  • Fixed price in writing before any work starts
Which fence are you after?
Where's the project at?
What kind of property is it?
What will the fence sit on?
Roughly how long, and how many gates?

Most backyard pools need 20 to 35 metres. Pace it out or check the pool plan. A rough guess is fine.

Gates
1
When do you need it in?

Where should we send your quote?

Frameless glass, about 25 metres with 1 gate.

Add a note or pool plan details

We reply within one business day. Your details are only used to quote your job. Privacy

Contact Free quote