Melbourne

Frameless glass pool fencing

12 mm toughened safety glass set into a hidden channel in the ground. No spigots, no posts, nothing between you and the view of the water.

Frameless glass pool fence set into crazy paving between a lawn and a pool and spa
Compliance comes firstBuilt around the applicable Victorian pool barrier requirements
More than just glassFrameless glass, semi-frameless, steel rod, batten and aluminium fencing
Experienced buildersConstruction-led installation with quality workmanship and attention to detail
Melbourne‑wide serviceServicing Melbourne and the Mornington Peninsula

What goes into a frameless glass fence

A frameless fence is a row of thick glass panels set into a channel built into the ground or paving. Nothing shows at the base: no spigots, no posts and no top rail. The glass looks like it grows out of the ground, and the pool stays the centrepiece of the yard.

  • 12 mm toughened safety glass. Panels are taller than 1200 mm because part of each panel sits down in the channel, so the top still clears the 1200 mm the rules ask for.
  • A hidden channel. The channel is built in with the paving, so the finished edge is clean and flush.
  • Your choice of hardware finish. Gate hinges and latches in polished, satin, matt black or matt white, to suit the house and the pool coping.
  • Soft-close gates. A glass gate on hydraulic soft-close hinges from Polaris or Atlantic, with a glass-to-glass latch, so it closes and latches by itself every time.

Is frameless right for your pool?

The channel has to go into the ground, so frameless suits jobs where the paving is new or being redone: a new pool, a landscaping job or a full makeover of the surround. On an existing slab, deck or retaining wall, semi-frameless is usually the better fit. It uses the same glass on small spigots that fix to what is already there.

Gates that pass inspection every time

The gate is where most failed pool inspections start. A glass gate has to close from any open position and latch without anyone touching it, and it has to swing away from the pool. We hang gates on a dedicated hinge panel with soft-close hinges, then set and test the closing speed and latch before we leave.

Keeping glass clear

Glass shows water spots and fingerprints, especially in the first summer. A hose-down and a squeegee every week or two keeps it looking new. For less cleaning, ask about an EnduroShield coating: water beads off the glass and it stays cleaner for longer between cleans.

Frameless or semi-frameless?

Frameless gives the cleanest possible finish. Semi-frameless uses the same thick glass on small spigots, which costs less per metre and goes onto existing surfaces. Plenty of pools use frameless where people sit and semi-frameless, steel rod or aluminium where they don't.

Our work

Recent frameless glass jobs

See all frameless glass projects
Frameless glass pool fence set into crazy paving between a lawn and a pool and spa
Lawn and spaFrameless glass · Glass set straight into the paving, no spigots
Freeform pool and spa on bluestone paving with frameless glass set into the ground on the lawn side
Pool, spa and pavingFrameless glass · Glass in a hidden channel beside the lawn

Questions

Common questions

How much does frameless glass pool fencing cost in Melbourne?

Frameless glass is the highest-cost option per metre, and each gate adds to the total. The price depends on the length, the ground the channel goes into and the gate hardware. Send us the details and we give you a fixed price in writing after a site visit.

What is the difference between frameless and semi-frameless?

Frameless glass sits in a channel built into the ground, so nothing shows at the base. Semi-frameless uses the same 12 mm glass held on small spigots at the bottom of each panel. It costs less and can go onto an existing slab or deck.

Is frameless glass hard to keep clean?

Glass shows water spots and fingerprints, so plan on a hose-down and squeegee every week or two in summer. An EnduroShield coating makes water bead off and keeps the glass cleaner for longer between cleans.

Will frameless glass pass a Victorian pool inspection?

Yes, when it is installed correctly. The glass must be at least 1200 mm high from finished ground level, gaps must be 100 mm or less, the gate must self-close and self-latch, and nothing climbable can sit in the 900 mm zone outside the fence. We build to AS 1926.1 and arrange the inspection.

Get a free quote

Answer six quick questions about your pool and tell us where to send the quote. It takes about a minute.

  • We reply within one business day
  • Free measure on site
  • Fixed price in writing before any work starts
Which fence are you after?
Where's the project at?
What kind of property is it?
What will the fence sit on?
Roughly how long, and how many gates?

Most backyard pools need 20 to 35 metres. Pace it out or check the pool plan. A rough guess is fine.

Gates
1
When do you need it in?

Where should we send your quote?

Frameless glass, about 25 metres with 1 gate.

Add a note or pool plan details

We reply within one business day. Your details are only used to quote your job. Privacy

Contact Free quote